genset to house for emergency use - PLC Drives and Automation Forums

		PLC Drives and Automation Forums > Old PLCDrives.com > Archived
genset to house for emergency use

Archived This is an import of the old PLC and Drives forum which ran from 2004 to 2006 and was basically a gateway for reading and posting to usenet.

Welcome to the PLC and Drives forum
You are currently viewing our site as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, photos and this advert will disappear. Registration is fast, simple and absolutely free so please, join our community today!

LinkBack

Thread Tools

Display Modes

#1 (permalink)

02-19-2006, 11:44 PM

stee911

Junior Member

Join Date: Feb 2006

Posts: 2

genset to house for emergency use

If i have a 32KW genset on a trailer can I use cam-lok type connectors mounted to an enclosure and through a transfer switch to tie it in? I would be running 2 hot, neutral and ground. The neutral and ground are tied to the genset frame. Would I need to use another earth ground at the genset?(IE:Copper rod driven into the earth.

« welding cable vs. eisl?? | Carbon Comp: Aging Causes Out Of Tol? »

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

All times are GMT +1. The time now is 10:02 PM.